P.E.P. TECHNOLOGY © CAD/CAM SOFTWARE Measurement Masters, Inc. 711 West 17 th Street, Building E-11 • Costa Mesa, CA 92627 Corporate: (949) 631-6950 Fax: (949) 631-6953 E-mail: firstname.lastname@example.org Intersection with a round tube: (Figure 2) The program can slice a round tube with another round tube that is at any angle other than 0 ° . It is only limited by not being able to create the intersection if the intersecting tube is offset from the centerline by an amount that will make it overlap either edge of the round tube stock. The program can create the correct intersection if the intersecting tube lies completely within the tube stock or extends beyond both edges of the tube stock. The user is prompted to choose which intersection they would like to keep. For a small diameter intersecting tube that lies completely within the tube stock, you are prompted to keep the top intersection, the bottom intersection, or both the top and the bottom intersection. For a large diameter intersecting tube, you are prompted to keep the left intersection, the right intersection, or both the left and the right intersection.